RC96 High Quality Split Type Small Portable Jaw Crusher For Mining and Metallurgy
1.Description
RC96 jaw crusher is a new jaw crusher developed by our company on the basis of absorbing the advanced technology of jaw crusher in China and abroad. Its unique structure, superior performance, is a variety of hard and strong corrosive rock mineral fragmentation preferred equipment. is widely used in mining, metallurgy, building materials, highway, railway, water conservancy and chemical industry and other industries for the coarse crushing of various materials.
2.Features
1. RC96 jaw crusher has good motion characteristics, special cavity design, energy saving by more than 10%, and productivity increased by more than 15%.
2. The unique crushing cavity design of the reinforced concrete jaw crusher greatly improves the utilization rate of the jaw plate. The jaw plate can be switched four times to achieve uniform wear. Improved material availability and extended service life.
3. The tooth surface on the jaw plate in the crushing cavity faces ace (swing jaw plate and fixed jaw plate), which is good for crushing hard materials.
4. The structure design of the adjustable transmission angle makes higher capacity in the same discharge outlet.
5. Fixed jaw plate and swing jaw plate can be changed for each other.
6. The hydraulic adjustment of double-jack for discharge outlet is convenient and labour-saving.
7. Swing jaw and the mainframe can be disassembled easily which is convenient for transportation.
3.Advantages
1. Heavy-duty design, suitable for various sand and gravel aggregates and mineral processing.
2. Large size bearings, large carrying capacity and long service life.
3. Split type and three different installation structures, suitable for various working conditions.
4. Wedge type material layout adjustment structure, adjustment more quick and convenient.
5. Large Angle, reasonable stroke, high speed making the output more while the machine is working.
6. The main engine and motor are installed all in one, and the foundation is connected with the foundation by rubber vibration damping pad, which makes the foundation more simple.
4.Working Principle
When jaw crusher works, electrical motor drives the V-belt to make the swing jaw move following the specific track by the eccentric shaft. After the materials enter into the crushing chamber, they are crushed between the two jaw plates by impacting, bending, and striking, and then discharged from the discharge opening.
5.Parameter
| | RC80
(Splitting Type/Welding Type) | RC96
(Splitting Type) | RC100
(Splitting Type) | RC106
(Splitting Type) | RC110
(Splitting Type) | RC125
(Splitting Type) | RC140
(Splitting Type) |
| Input opening size(mm) | 510×800 | 580×930 | 760×1000 | 700×1060 | 850×1100 | 950×1250 | 1070×1400 |
| capacity (t/h) | | | | | | | |
| Motor Power(kW) | 75 | 90 | 110 | 110 | 160 | 160 | 200 |
| Rotation speed of eccentric shaft(rpm) | 350 | 330 | 260 | 280 | 230 | 220 | 220 |
| Feed Size(mm) | Tight edge discharge opening (mm) | t/h | t/h | t/h | t/h | t/h | t/h | t/h |
| 0-30 | 20 | | | | | | | |
| 0-35 | 25 | | | | | | | |
| 0-45 | 30 | | | | | | | |
| 0-60 | 40 | 65-85 | | | | | | |
| 0-75 | 50 | 80-95 | | | | | | |
| 0-90 | 60 | 95-125 | 120-155 | | | | | |
| 0-105 | 70 | 115-150 | 140-180 | 150-210 | 155-200 | 190-250 | | |
| 0-120 | 80 | 130-170 | 160-210 | 170-225 | 175-230 | 210-275 | | |
| 0-135 | 90 | 150-195 | 180-235 | 190-245 | 200-260 | 235-305 | | |
| 0-150 | 100 | 165-215 | 200-260 | 215-280 | 220-290 | 255-330 | 290-380 | |
| 0-185 | 125 | 210-275 | 250-325 | 265-345 | 280-365 | 310-405 | 350-455 | 385-500 |
| 0-225 | 150 | 250-325 | 300-390 | 315-410 | 335-435 | 370-480 | 410-535 | 455-590 |
| 0-260 | 175 | 290-380 | 350-455 | 370-480 | 390-510 | 425-550 | 470-610 | 520-675 |
| 0-300 | 200 | | | 420-545 | 445-580 | 480-625 | 530-690 | 590-765 |
| 0-340 | 225 | | | | | | 590-770 | 655-850 |
| 0-375 | 250 | | | | | | 650-845 | 725-945 |
| 0-410 | 275 | | | | | | | |
| 0-450 | 300 | | | | | | | |
6.Dimensions and weight
| | | RC80 | RC96 | RC100 | RC106 | RC110 | RC125 | RC140 |
| A | mm | 800 | 930 | 1000 | 1060 | 1100 | 1250 | 1400 |
| B | mm | 510 | 580 | 760 | 700 | 850 | 950 | 1070 |
| C | mm | 1526 | 1755 | 2420 | 2030 | 2385 | 2800 | 3010 |
| D | mm | 2577 | 2880 | 3670 | 3320 | 3770 | 4100 | 4400 |
| E | mm | 1750 | 1460 | 2490 | 2005 | 2750 | 2980 | 3140 |
| F | mm | 1200 | 755 | 1700 | 1135 | 1940 | 2100 | 2260 |
| G | mm | 2100 | 2500 | 2965 | 2630 | 2820 | 3470 | 3755 |
| H | mm | 625 | 465 | 775 | 700 | 580 | 980 | 1050 |
| Jaw Crusher Weight) | kg | 7670 | 9759 | 20060 | 14350 | 25800 | 45000 | 54000 |
Remarks:
Without including the crusher of optional parts
7.Structure
8. Construction Site
Moving to working site
Working Site
Product Tags:
|
|
RC96 Model High Quality Split Type Small Portable Jaw Crusher For Mining and Metallurgy Crushing Images
|
